Sample Kit 6mm - 10 parts bonded together with Nano Epoxy (36.0 Grams) - 708744109521
Here is a sample that we use to demonstrate a finished assembly. This sample uses Nano Epoxy with our best known bonding practices. Tug it, bend it, let's see if it makes sense to build your next project with our parts. The sample has the following parts.
Tubing: This Bonding System is intended to be used with our Round 3k Weave Carbon Fiber Tubing and all Composite Connectors. Use our high strength epoxy injection bonding kit to bring your design to market fast, strong, and reliable every time.
Use our high strength epoxy injection bonding kit to bring your design to market fast and strong every time. P/N:708744108562for maximum bond strength to 3K weave tubing.
This design was developed using Autodesk Fusion360. Download this "smart part" 3D model that carries vital strength and weight information. Drag and drop into your next design
This part is designed with a 4mm wall section and a honeycomb internal superstructure to maximize the weight to strength material properties. These parts are lighter than plastic, yet super strong to get you the highest weight to strength ration in the business.
Key Product Features:
Connects 6,8,10,12,16,20mm Carbon Fiber Tubing with Epoxy Bonding
Airtight Design That Provides an Internal Fluid/Air Passage
Ultra Lightweight Built with 50% Honeycomb Inner Core
Less Mess, Better Bond Using Our JB Weld Epoxy Static Mix Injection Glue System
Transfers 160PSI Internal Pressures Used to Move Air/Fluids Internally
Works with6,8,10,12,16,20mm 3K Weave Carbon Fiber Tubing - Slip fit with injection glue joint
High Strength, Waterproof, Good UV Stability
Easy to Assemble – Works with 3K Weave Tube
Download Fusion360 CAD Models to get material weights and property strengths.
Carbon Fiber/Nylon with 50% fill inner core. We build all connectors with a lattice interweave design. Our 3K weave carbon fiber tube is manufactured with a high gloss finish.
Sand 3K Carbon Fiber Tube then use alcohol or acetone to clean both surfaces. Inject JB Weld 2-part Quickset 5 Minute Plastic Epoxy into glue ports using a static mixing tube. Use our static mixing tube and adapter kit P/N: 708744108562 to insure that glue is properly mixed. Wipe all surfaces once glue has been installed into the glue trap. Click on the instructions belowto download a set of printed bonding instructions. Download assembly and installation instructions along with product strength ratings atwww.overnightcomposites.com
Color is Black, Ultra Light Weight, Internal Honeycomb Structure, Glue Injection Feature, PAT. PEND.